Manufacturers

Specials

Viewed products

Termometro digitale Family Microlife View larger

Family Microlife Digital Thermometer

MT16F1

New product

Thermometer with temperature measurement in 60 seconds, without mercury. Memory of the last measurement and beep.

More details

Delivery in 24/48 hours

No reward points for this product.


5,90 €

Add to my wishlist

Congratulations!
Please note that this list has been automatically created
Product added to the list
Close
Log in

You need to be logged in order to add products to a list

Sorry!

Please contact the shop first to be allowed to create a list

More info

Medical device EC 0044 class IIa.
Thermometer with temperature measurement in 60 seconds, without mercury. Memory of the last measurement and beep.

How to use:
Switching on the thermometer:
To turn on the thermometer, press the ON/OFF button; a short beep indicates that the thermometer is on.
A display test is automatically performed. All segments are displayed.
When the ambient temperature is less than 32 °C, a <> (Low - temperature too low to be detected) will appear on the display, and in the upper right a flashing <<°C>> will appear.
The thermometer is now ready to use.
Instructions for use:
Choose the type of measurement you want to use.
During measurement, the temperature is displayed continuously on the display and the <<°C>> symbol flashes.
When the temperature increase is less than 0.1 °C every 16 seconds the beep-beep-beep will notify you that the temperature measurement is finished, the <<°C>> symbol will stop flashing and the thermometer will be ready for body temperature reading.
To extend battery life, turn off the thermometer after use by briefly pressing the ON/OFF button.
Otherwise the thermometer will turn off automatically after about 10 minutes.
Record values:
If you hold down the ON/OFF button for more than three seconds when turning on the thermometer, the temperature recorded during the last measurement will automatically appear on the display.
A small <> will indicate that the reading is that of a stored data.
About 3 seconds after the button is released, this value will disappear and the thermometer will be ready for measurement.
After that the stored value will be deleted.

Types of measurement:
Oral:
Place the thermometer in one of the two pockets, left or right, next to the root of the tongue. The thermometer sensor must be well in contact with the fabric. Close the mouth and breathe only from the nose so as not to alter the measurement. Approximate measurement time: 1 minute.
Rectal:
It is the safest and most suitable method for infants and children. Carefully introduce the thermometer probe into the anus up to a maximum of 2-3 cm. Approximate measurement time: 1 minute.
Axillary:
For a more reliable result, measure body, oral or rectal temperature. We recommend keeping the thermometer under the armpit for at least 3-5 minutes even after hearing the end-of-measurement beep. Approximate time (at beep): 1 minute.

Cleaning and maintenance:
Use a cotton swab soaked in 70% Isopropyl alcohol to clean and disinfect the thermometer. Do not use abrasive detergents or benzene to clean and never immerse the appliance in water or other liquids.

27 other products in the same category:


Scarica da Apple Store